|
|
TM 5-2410-237-23
TRANSMISSION ASSEMBLY REPAIR - CONTINUED
0245 15
ASSEMBLY - CONTINUED
NOTE
Ensure that springs align with recess in No. 1 piston.
Two capscrews (78) that hold clutch housing together are slightly shorter in length and heads are
marked "X." These capscrews are located at openings for manifold that is on outside of transmission.
Capscrews hold clutch housings together.
91.
Install two short capscrews (78) and washers (79) in
79
78
marked holes of No. 1 clutch housing (77). Tighten
capscrews to 85 5 lb-ft (115 7 Nm).
92.
Install seven long capscrews (75) and washers (76) in
clutch housing (77). Tighten capscrews to 85 5 lb-ft
77
(115 7 Nm).
75
80 (HIDDEN)
76
421-0204
93.
Lower temperature of bearing (74) and install bearing
in bearing cage (72).
72
421-0268
74
0245 15-39
Change 1
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |