 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
TRANSMISSION ASSEMBLY REPAIR - CONTINUED
0245 15
ASSEMBLY - CONTINUED
WARNING
Hot oil or metal parts can cause severe burns. Wear insulated gloves, long sleeves and eye protection when
working with heated parts.
7.
Heat race and roller assembly (175) to maximum temperature of 275F (135C) and install on pinion (172).
8.
Install cover (156) in position over pinion (172).
9.
Install gear (174) on pinion (172).
10.
Heat race and roller assembly (173) to maximum temperature of 275F (135C). Install race and roller assembly on pin-
ion (172).
11.
Install capscrew (170) and washer (171) on pinion. Tighten capscrew to 80 5 lb-ft (108 7 Nm).
172
156
156
167
175
166
19
174
173
169
171
170
421-0249
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in injury or death.
NOTE
LIFTING LINK
Weight of case assembly is 80 lb (36 kg).
12.
Install three lifting links in cover assembly (156) with
156
3/8-16NC bolts, attach lifting device and install cover
assembly in position on transfer gear case (19).
13.
Install 11 capscrews (167) and 6 new locks (166) to
secure cover (156) to transfer gear case (19). Bend
locks up.
19
421-0263
0245 15-25
Change 1
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals