|
|
TM 5-2410-237-23
TURBOCHARGER REPAIR - CONTINUED
0245 13
ASSEMBLY - CONTINUED
9.
Secure cartridge (2) and install new washer (27), new sleeve (26), new bearing (25), washer (24) and deflector (23) into
cartridge.
10.
Install two new seal rings (21) onto sleeve (20).
11.
Push new sleeve (20) into new insert (19). Install new preformed packing (22) onto insert.
12.
Install insert (19) into cartridge (2) and install new snap ring (18).
13.
Install compressor wheel (8) onto shaft.
CAUTION
Ensure sealing compound does not contact compressor wheel bore on shaft. Sealing compound will make
removal of compressor wheel difficult during future disassembly.
14.
Clean shaft threads and new nut (7) and apply sealing
7
compound on nut and shaft threads.
18
22
15.
Lubricate area of nut (7) that comes in contact with
compressor wheel (8) with clean oil. Do not lubricate
threads.
20
16.
Install nut (7) and tighten to 44 2 lb-ft (60 3 Nm).
8
26
2
27
19
21
23 24
25
421-0241
0245 13-5
Change 1
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |