|
|
TM 5-2410-237-23
FUEL INJECTION PUMP MAINTENANCE - CONTINUED
0245 09
REMOVAL
NOTE
Removal is the same for each fuel injection pump.
Mark plungers and barrels with their location in fuel injection pump housing.
Plungers and barrels are sets and can not be mixed.
1.
Remove four bolts (1), cover (2) and gasket (3) from fuel injection pump housing (4). Discard gasket.
2.
Move fuel rack (6) until timing pin can be installed in pump housing hole (5). The fuel rack slot edge contacts timing pin
when rack is in center position.
3.
Use injection pump wrench to remove bushing (7). Discard bushing.
4.
Remove O-ring (8) from fuel injection pump housing (4). Discard O-ring.
5.
Use extractor to remove fuel injection pump (9).
6.
Remove spacer (10) from fuel injection pump (9). Discard spacer.
7.
Repeat steps 3 through 6 to remove other fuel injection pumps (9).
10
9
7
8
5
6
(HIDDEN)
421-0146
3
1
4
2
Change 1
0245 09-2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |