|
|
TM 5-2410-237-23
CRANKSHAFT AND BEARINGS ASSEMBLY MAINTENANCE - CONTINUED
0245 03
REMOVAL - CONTINUED
NOTE
Mark bearing cap locations before removing bearing caps to aid in installation.
3.
Remove 14 main bearing capscrews (3) and washers
3
(4), then remove 7 bearing caps (5) and lower bearing
shells (6).
4
4.
Remove seven lower bearing shells (6) from main
bearing caps (5) and mark bearing caps for proper
location. Discard bearing shells.
3
4
6
421-0081
5
5.
Remove two lower thrust plates (7). Mark "LF" for
lower front or "LR" for lower rear.
6.
Remove two upper thrust plates and mark in the same
manner.
7
421-0082
Change 1
0245 03-2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |