 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
CYLINDER LINERS REPLACEMENT - CONTINUED
0245 02
INSTALLATION
NOTE
It is important to apply liquid detergent or oil to new gasket and preformed packings immediately
before installation of cylinder liner. If applied too early, gasket and preformed packings may swell and
become pinched under cylinder liner when liner is installed.
If new preformed packings are brown in color, apply clean oil instead of liquid detergent.
1.
Apply liquid detergent to cylinder liner (1), liner bore surfaces in cylinder block (2) and three new preformed packings
(4), just prior to cylinder liner installation.
2.
Install three new preformed packings (4) to grooves on cylinder liner (1).
3.
Place new gasket (3) in clean oil for a brief moment, then install on cylinder liner (1).
NOTE
Ensure cylinder liner and cylinder block are aligned in accordance with marks made during Projection Check.
4.
Before gasket (3) has time to expand, install cylinder
3
liner (1) in cylinder block (2).
5.
Use installer to press cylinder liner (1) fully into bore.
6.
Repeat steps 1-5 to install five remaining cylinder lin-
1
2
ings (1).
4
421-0016
7.
Install pistons and connecting rods (WP 0245 04).
8.
Install cylinder head assembly and spacer plate (WP 0025 00).
END OF WORK PACKAGE
0245 02-7
Change 1
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals