 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
BLADE DIAGONAL BRACES AND STRUT ASSEMBLY REPLACEMENT - CONTINUED
0236 00
INSTALLATION
1.
Apply GAA grease to bearing (13) and install bearing into cage (14).
2.
Install four bolts (10), new lockwashers (11), plate (12) and cage (14) to strut (9).
3.
Install strut (9) to strut (8).
WARNING
Use extreme caution to prevent heavy parts from falling or tipping. Use a suitable lifting device to lift
heavy parts. Failure to follow these precautions could result in serious injury.
Use caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear
of heavy parts supported only by lifting device. Failure to follow this warning may cause injury or
death.
NOTE
Strut assembly weighs approximately 250 lb (114 kg).
4.
Use a nylon sling and a suitable lifting device to install strut assembly into position between pusharms (5 and 19).
5.
Install pin (18) and new cotter pin (17) to connect strut (9) to pusharm (19).
6.
Install pin (16) and new cotter pin (15) to connect strut (8) to pusharm (5).
7.
Install pin (21) two washers (22) and new cotter pin (20) to secure strut (8) to bulldozer blade.
8.
If removed, install eyebolt (2) to brace (1).
NOTE
Blade diagonal brace weighs 91 lb (41 kg).
9.
Attach a nylon sling and a suitable lifting device to brace (1) and eyebolt (2) assembly.
0236 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals