 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
BLADE DIAGONAL BRACES AND STRUT ASSEMBLY REPLACEMENT - CONTINUED
0236 00
REMOVAL
WARNING
Use extreme caution to prevent heavy parts from falling or tipping. Use a suitable lifting device to lift
heavy parts. Failure to follow these precautions could result in serious injury.
Use caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear
of heavy parts supported only by lifting device. Failure to follow this warning may cause injury or
death.
NOTE
Blade diagonal brace weighs 91 lb (41 kg).
1.
Attach a nylon sling and a suitable lifting device to brace (1) and eyebolt (2) assembly.
2.
Remove cotter pin (3) and pin (4) from brace (1) and pusharm (5). Discard cotter pin.
3.
Remove cotter pin (6) and pin (7) from eyebolt (2) and strut (8). Use nylon sling and lifting device to remove brace (1)
and eyebolt (2) assembly. Discard cotter pin.
4.
As required remove eyebolt (2) from brace (1).
5.
Repeat steps 1-4 to remove other brace (1) and eyebolt (2) assembly.
NOTE
Strut assembly weighs approximately 250 lb (114 kg).
6.
Attach a nylon sling and a suitable lifting device to
16
4
strut assembly which consists of strut (8), strut (9),
5
15 8
7
four bolts (10), lockwashers (11), plate (12), bearing
21
(13) and cage (14).
7.
Remove cotter pin (15) and pin (16) from strut (8) and
22
pusharm (5). Discard cotter pin.
8.
Remove cotter pin (17) and pin (18) from strut (9) and
pusharm (19). Discard cotter pin.
9.
Remove cotter pin (20), pin (21), two washers (22)
and release strut (8) from attachment to bulldozer
3
blade. Discard cotter pin.
1
20
2 6
10.
Use nylon sling and lifting device to remove strut
12
assembly.
13
11.
Remove strut (8) from strut (9).
10
14
12.
Remove four bolts (10), lockwashers (11), plate (12),
9
bearing (13) and cage (14) as a unit from strut (9). Dis-
11
card lockwashers.
13.
Remove bearing (13) from cage (14).
18
19
17
387-769
0236 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals