 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
FUEL PRESSURE GAGE REPLACEMENT - CONTINUED
0232 00
REMOVAL
WARNING
DO NOT perform fuel system checks, inspections or maintenance while smoking or near fire, flames or
sparks. Fuel may ignite, causing damage to machine and injury or death to personnel.
CAUTION
Clean area to remove dirt before removing gage and fittings. Plug opening in filter base to prevent contam-
ination of fuel system.
NOTE
Some fuel may drain when removing pressure gage. Use a suitable container to capture any fuel. Dispose of
fuel IAW local policy and ordinances. Ensure all spills are cleaned up.
1.
Remove fuel pressure gage (1) from elbow (2).
2.
Remove elbow (2) from nut (3).
3.
Remove nut (3) and preformed packing (4) from secondary fuel filter base (5). Discard preformed packing.
INSTALLATION
NOTE
Lightly coat new preformed packing with clean fuel before installation.
1.
Install new preformed packing (4) and nut (3) to secondary fuel filter base (5).
2.
Install elbow (2) to nut (3).
3.
Install fuel pressure gage (1) to elbow (2).
4.
Open fuel shutoff valve.
5.
Start engine and check fuel pressure gage for proper operation and leaks (TM 5-2410-237-10).
5
3
2
1
4
387-393
END OF WORK PACKAGE
0232 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals