|
|
TM 5-2410-237-23
AIR CONDITIONING INSTALLATION INSTRUCTIONS - CONTINUED
0229 03
A/C COMPRESSOR INSTALLATION - CONTINUED
19.
Remove oil level gage tube (WP 0012 00).
121
20.
Bolt plate (119) to oil cooler pipe of machine with two
120
121
bolts (120) and two washers (121).
21.
Insert oil level gage guide (122) into connector on
machine from which old one was removed.
22.
Install oil relief tube on oil level gage guide (122) and
125
tighten (WP 0012 00).
119
23.
Bolt oil level gage guide (122) to plate (119), using
124
one washer (123) as a spacer between plate and oil
123
level gage guide. Secure with one bolt (124), two
washers (121) and one nut (125).
24.
Install oil level gage (WP 0012 00).
122
421-0354
25.
Remove oil sampling valve cover bracket (130) from
129
cylinder head (WP 0014 00).
26.
Place new gasket (126) on four-bolt pattern and install
128
bracket (127) with two short bolts (128).
131
27.
Fasten oil sampling valve bracket (130) on top of
130
bracket (127), with two longer bolts (129) and four
washers (131) used as spacers between brackets.
131
127
126
421-0355-1
0229 03-19
Change 1
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |