 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
BLADE LIFT CYLINDER MOUNTING TUBE REPLACEMENT - CONTINUED
0222 00
INSTALLATION
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
CAUTION
Use caution not do damage fan guard and radiator as tube is lifted clear of radiator guard.
NOTE
Blade lift cylinder mounting tube weighs approximately 426 lb (193 kg).
1.
Attach a nylon sling and a suitable lifting device to tube (1).
CAUTION
Use caution not to damage fan guard and radiator as tube is positioned at radiator guard.
2.
Lift tube (1) into position on radiator guard (5).
3.
Install two bolts (4) to underside of tube mounting at each end of tube (11).
4.
Install two bolts (3) and nuts (2) to each end of tube (1).
5.
If removed, install grease fitting (6) to each end of tube (1).
6.
Apply GAA grease, as needed, to grease fittings (6) on tube (1).
7.
If damaged remove grease fitting (6) from each end of tube (1).
8.
Install hydraulic lines and fittings that are routed above tube (1) (WP 0213 00).
9.
Install blade lift cylinders (WP 0220 00).
10.
Install hood (WP 0159 00).
END OF WORK PACKAGE
0222 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals