 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
BLADE LIFT CYLINDER MOUNTING TUBE REPLACEMENT - CONTINUED
0222 00
REMOVAL - CONTINUED
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
NOTE
Blade lift cylinder mounting tube weighs approximately 426 lb (193 kg).
2.
Attach a nylon sling and a suitable lifting device to
6
tube (1). Take up all slack in sling.
1
3.
Remove two nuts (2) and bolts (3) from each end of
tube (1).
4.
Remove two bolts (4) from underside of tube mount-
ing on each end of tube (1).
CAUTION
Use caution not to damage fan guard and
radiator as tube is lifted clear of radiator
guard.
5.
Remove tube (1) from radiator guard (5).
6.
If damaged, remove grease fitting (6) from each end of
tube (1).
4
2,3
387-576
5
0222 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals