 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
BLADE TILT CYLINDER HYDRAULIC LINES AND FITTINGS - CONTINUED
0214 00
REMOVAL - CONTINUED
NOTE
Tag hydraulic lines to ensure correct installation.
Use a suitable container to catch any hydraulic oil that may drain from system. Dispose of oil IAW local
policy and ordinances. Ensure all spills are cleaned up.
1.
Remove four nuts (1), capscrews (2), washers (3), two split flanges or regular flange (4), hydraulic line (5) and O-ring
(6). Discard O-ring.
2.
Loosen connector (7) and remove hydraulic line (8) from connection.
3.
Remove O-ring (9) from connector (7). Discard O-ring.
NOTE
Mounting hardware for clamps and retaining straps may vary depending on their type and location.
4.
Remove capscrew (10), washer (11) and clamp (12) from hydraulic lines.
5.
Remove nut (13), capscrew (14), washer (15), retaining strap (16) and clamp (17) from hydraulic lines.
8
7
9
1
6
4
3
13,14,15,16,17
5
2
387-719
10,11,12
INSTALLATION
CAUTION
Wipe all sealing surfaces and hose connections clean and dry prior to installation. Contamination of
hydraulic system could result in premature failure.
Utilize line wrenches for installation to avoid damage to fittings and connectors.
0214 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals