 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
BLADE TILT CYLINDER REPLACEMENT - CONTINUED
0209 00
REMOVAL - CONTINUED
1.
Remove four capscrews (1), lockwashers (2) and hose guard (3) from tilt cylinder (4) on right side of machine. Discard
2.
Tag two hoses (5).
3.
Remove four capscrews (6), flatwashers (7), two flanges (8), O-ring (9) and one hose (5). Discard O-ring.
4.
Repeat step 3 for other hose (5).
5
4
6,7,8,9
3
1,2
387-702
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
NOTE
12
10
Tilt cylinder weighs 248 lb (112 kg).
11
5.
Attach a nylon sling and a suitable lifting device to
center of tilt cylinder (4).
4
NOTE
Ball joint socket stays with tilt cylinder. It
can only be removed by disassembling cyl-
16
14,15
inder.
6.
Remove four bolts (10), ball joint socket (11) and
13
shims (11) from bulldozer blade (13).
7.
Remove cotter pin (14) and slide pin (15) out of push-
arm (16). Remove tilt cylinder (4) from bulldoze blade
387-703
(13) and pusharm. Discard cotter pin.
0209 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals