 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
BLADE CONTROL LEVER AND LINKAGE REPLACEMENT - CONTINUED
0207 00
REMOVAL - CONTINUED
12.
Remove two nuts (31), bolt (32) and top end of rod (33) assembly from lever (34).
13.
Remove two nuts (35), bolt (36) and lower end of rod (33) assembly from lever at blade control valve.
14.
Loosen nut (37), remove rod end (38) and nut from one end of rod (33).
15.
Repeat step 14 at other end of rod (33).
16.
Remove nut (39), capscrew (40), lever (34) and key (41) from shaft (42).
17.
Remove shaft (42) from bracket (43).
36
35
35
37
33
37
32
31
33
39,40,41
34
42
43
38
387-643
18.
Remove pin (44) from shaft (42) and shaft (45).
19.
Remove shaft (45) and blade control lever (6) from shaft (42).
20.
Remove two bearings (46) from blade control lever (6).
21.
Remove four bolts (47), washers (48) and bracket (43) from control console (4).
22.
Remove two bearings (49) from bracket (43).
0207 00-4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals