|
|
TM 5-2410-237-23
BLADE CONTROL LEVER AND LINKAGE REPLACEMENT - CONTINUED
0207 00
REMOVAL - CONTINUED
8.
Remove self-locking nut (20) and rod end (21) from
6
blade control lever (6). Discard self-locking nut.
9.
Remove two capscrews (22) and washers (23) from
boot flange (24) and slide boot (25) and boot flange
20
partially up rod (26).
10.
Remove cotter pin (27), pin (28) and disconnect rod
(26) from blade tilt pilot valve (29). Discard cotter pin.
11.
Loosen nut (30), remove rod end (21), nut, boot (25)
and boot flange (24) from rod (26).
21
22
30
23
24
25
26
27
28
29
387-642
0207 00-3
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |