|
|
TM 5-2410-237-23
HYDRAULIC PRESSURE CONTROL VALVE REPLACEMENT - CONTINUED
0203 00
REMOVAL - CONTINUED
NOTE
Use a suitable container to catch any hydraulic oil that may drain from system. Dispose of oil IAW local
policy and ordinances. Ensure all spills are cleaned up.
Tag hoses before removal to ensure correct installation.
1.
Disconnect hose (1) from front face of hydraulic control valve (2).
2.
Remove O-ring (3) from end of hose (1). Discard O-ring.
3.
Disconnect hose (4) from front face of hydraulic control valve (2).
4.
Remove O-ring (5) from end of hose (4). Discard O-ring.
5.
Disconnect hose (6) from front face of hydraulic control valve (2).
6.
Remove O-ring (7) from end of hose (6). Discard O-ring.
7.
If equipped with ripper, disconnect hose (8) from side of hydraulic control valve (2).
8.
Remove O-ring (9) from end of hose (8). Discard O-ring.
9.
Remove two nuts (10), washers (11), capscrews (12) and hydraulic control valve (2) from fender brace assembly (13).
Support hydraulic control valve until disconnection of hose (14).
10.
Disconnect hose (14) from underside of hydraulic control valve (2).
11.
Remove O-ring (15) from end of hose (14). Discard O-ring.
3
1
9
2
2
8
10,11,12
75
64
13
387-494
14,15 (HIDDEN)
0203 00-2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |