|
|
TM 5-2410-237-23
PERSONNEL HEATER MAINTENANCE - CONTINUED
0192 00
REMOVAL - CONTINUED
NOTE
Use a suitable container to capture any residual coolant in hoses. Dispose of coolant IAW local policy and
ordinances. Ensure all spills are cleaned up.
4.
Loosen two hose clamps (6) and remove hoses (7)
7
6
from back of heater (5).
5.
Remove capscrew (8), washer (9) and ground wire
3
(10) from lower rear corner of heater (5).
6.
Remove three capscrews (8), washers (9) and heater
2
(5) from mounting brackets (11).
4
10
387-489
11
5
8,9
DISASSEMBLY
1.
Remove capscrew (12) from each side of heater. Remove support panel (13) with fan motors (14).
2.
Lift heater core (15) and screen (16) out of heater cover (17).
3.
Remove fan blades (18) from fan motors (14) by sliding off motor shafts. Cut tiedown strap on motor wires. Discard
tiedown strap.
4.
Remove four nuts (19), washers (20) and two fan motors (14) from support panel (13).
18
13
12
19
20
12
14
15
14
17
16
387-490
13 14
387-491
0192 00-2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |