|
|
TM 5-2410-237-23
DRAWBAR PIN AND LATCH REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Applicable Configuration
Materials/Parts
Pin, cotter (5)
Tractor with winch
Equipment Condition
Tools and Special Tools
Machine parked on level ground (TM 5-2410-237-
10)
Tool kit, general mechanic's (Item 122, WP 0250
REMOVAL
1.
Remove nut (1), bolt (2) and latch (3) from weldment (4).
2.
Remove cotter pin (5) and drawbar pin (6) from bracket (7). Discard cotter pin.
3.
Remove capscrew (4), nut (5) and latch (1).
INSTALLATION
3
4.
Install latch (3) to weldment (4) with bolt (2) and nut
6
4
(1).
5.
Install drawbar pin (6) in bracket (7).
1,2
6.
Install new cotter pin (5) in drawbar pin (6).
7.
Ensure latch (3) moves freely. Loosen or tighten nut
(1) as needed.
7
5 (HIDDEN)
END OF WORK PACKAGE
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |