 |
|||
|
|
|||
|
Page Title:
OIL FILTER ASSEMBLY INSTALLATION |
|
||
| ||||||||||
|
|
 TM 5-2410-237-23
WINCH OIL FILTER ASSEMBLY MAINTENANCE - CONTINUED
0185 00
OIL FILTER ASSEMBLY INSTALLATION
NOTE
Lightly coat new O-rings with clean oil before installation.
1.
Install two new O-rings (20) on pipe (19).
2.
Push pipe (19) into filter head (18).
3.
Position filter head (18) and pipe (19) inside winch case. Install two capscrews (16) and washers (17) to secure filter
head to winch case.
4.
Secure top of pipe (19) with lock (15) and capscrew (14).
5.
Place new gasket (13) on access cover (12).
NOTE
Use guide screw installed as shown in winch
case to help with installation of access cover.
GUIDE
SCREW
6.
Position access cover (12) and install 14 new lock-
washers (11) and capscrews (10).
7.
Remove guide screw and install remaining new lock-
washer (11) and capscrew (10).
8.
Install oil filter element. Refer to Changing Oil Filter
Element.
20
9.
Start engine and run at low idle. Check level of oil in
15
20 14
winch sight gage. Add oil if oil is not visible in gage
18
13
10.
Check winch for proper operation and leaks (TM 5-
12
2410-237-10).
19
17
16
387-476
.
END OF WORK PACKAGE
0185 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals