 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
WINCH CONTROL LEVER AND LINKAGE ADJUSTMENT - CONTINUED
0182 00
ADJUSTMENT - CONTINUED
5.
Remove four capscrews (10) and guide (11) from cover (12).
6.
Put control lever (13) in BRAKE ON position (A).
7.
Remove spring pin, lockwasher (14) and rod end (15) of control cable (9) from control lever (13). Discard lockwasher
and spring pin.
8.
Loosen nut (16) and adjust rod end (15) until dimensions (B and C) are same when control lever (13) is in BRAKE ON
position (A).
9.
Install new lockwasher (14) and rod end (15) on control lever (13) with new spring pin.
10.
Tighten nut (16) securely.
11.
Remove capscrew (17), self-locking nut (18) and rod end (19) of control cable (20) from bellcrank (21).
12.
Loosen nut (22). Move control lever (13) to BRAKE OFF position (D).
24
10
BC
21
11
17,18
13
D
12
19
A
14
15
16
22
20
9
387-395
387-394
13.
Install pressure gage in brake pressure tap (23) in con-
9
trol valve (8).
7
23
5,6
8
387-388
0182 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals