|
|
TM 5-2410-237-23
TRACK ROLLER FRAME GUARDS REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Personnel Required
Tools and Special Tools
Two
Tool kit, general mechanic's (Item 122, WP 0250
Equipment Condition
Materials/Parts
Machine parked on level ground (TM 5-2410-237-
10)
Compound, antiseize (Item 6, WP 0249 00)
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Failure to follow this warning may result in injury to personnel.
REMOVAL
NOTE
Guard (3) weighs 24 lb (11 kg).
1.
Remove four bolts (1), washers (2) and guard (3) from front end of track roller frame.
NOTE
Guard (6) weighs 52 lb (24 kg). All other guards weigh 20 lb (9 kg) or less.
2.
Remove nine bolts (4), washers (5) and guard (6) from center of track roller frame.
3.
Remove five bolts (7), washers (8) and guard (9) from rear of track roller frame.
4.
Remove four bolts (10), washers (11) and (12) from rear of track roller frame.
3
6
4,5
12
9
1,2
10,11
7,8
387-311
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |