CLEANING AND INSPECTION - TM-5-2410-237-230834

TM 5-2410-237-23

STEERING CLUTCH CONTROL VALVE MAINTENANCE - CONTINUED

0154 00

CLEANING AND INSPECTION

WARNING

Solvent cleaning compound MIL-PRF-680 Type III is an environmentally compliant and low toxic mate-

rial. However, it may be irritating to the eyes and skin. Use protective gloves and goggles. Use in well-venti-

lated areas. Keep away from open flames and other sources of ignition.

Clean all sealing surfaces, mating surfaces and tube assembly connections with solvent cleaning compound and allow to

dry.

Inspect internal casing and internal parts of control valve for cracks, wear, scoring and damage. If components and parts

are damaged, replace as necessary.

ASSEMBLY

NOTE

Apply a light coat of clean oil to all parts before assembly.

Install two bearings (66) in shaft openings in lever housing (32).

NOTE

Before installing new seals (65), apply silicone gasket forming compound to seal seat in lever housing and

allow to dry.

Install two new seals (65) in shaft openings in lever housing (32).

Install roller (68) in lever (59) with pin (69) and new cotter pin (67).

Repeat step 3 for other lever (59).

387-742

0154 00-6