 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
STEERING CLUTCH MAINTENANCE - CONTINUED
0152 00
ASSEMBLY - CONTINUED
NOTE
For better wear distribution, install discs and disc assemblies in reverse order of disassembly. For example,
top is now installed on bottom.
7.
Install eight disc assemblies (22) on seven discs (23) in alternating sequence, starting with a disc assembly (22). Center
disc assemblies in outer drum (17).
8.
Install pressure plate (18) on top of stack and align threaded bores with sleeves (27).
9.
Position round block (B) on pressure plate (18) inside circle of threaded bores and apply only enough pressure with
press (A) to get capscrews started.
10.
Apply antiseize compound on threads of eight capscrews (19).
11.
Install eight capscrews (19), washers (21) and four locks (20) to secure pressure plate (18) to retainer (28). Tighten cap-
screws to 150 lb-ft (203 Nm).
12.
Release pressure and remove block (B).
19
A
B
21
20
18
23
22
27
(HIDDEN)
17
387-253
0152 00-7
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals