 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
STEERING CLUTCH MAINTENANCE - CONTINUED
0152 00
ASSEMBLY
NOTE
Assemble steering clutch on bed of hydraulic arbor press. Compression of stack is required in order to
assemble steering clutch. Assemble steering clutch inside of outer drum (17) to ensure correct spline assign-
ment for discs (23) and disc assemblies (22).
1.
Position outer drum (17), with threaded bores facing down, on bed of hydraulic press.
2.
Center round block inside outer drum (17) and place
29
retainer (28), with boss side up, on block.
3.
Install eight sleeves (27) in bosses on retainer (28).
24
4.
Install eight inner springs (26) and outer springs (25)
over sleeves (27) and bosses on retainer (28).
5.
Install two 8 in. long capscrews (29) in inner hub (24)
25
180 apart.
6.
Use two long capscrews (29) as handles to lift inner
hub (24) into position over springs (25 and 26) and
26
retainer (28). Align threaded bores in inner hub with
sleeves (27) inside springs. Remove two capscrews.
28
27
17
387-252
0152 00-6
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals