|
|
TM 5-2410-237-23
STEERING CLUTCH MAINTENANCE - CONTINUED
0152 00
REMOVAL - CONTINUED
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
NOTE
Steering clutch assembly weighs approximately 175 lb (79 kg).
10.
Attach a nylon sling and suitable lifting device to capscrews (15) in brake band (10) clamp and raise lifting equipment to
take up slack.
NOTE
Tractor must be moved, using jack, to position clutch for removal of last capscrew on each side of steering
clutch.
11.
Remove remaining two capscrews (4) and washers
4,14
(14) from one side of steering clutch (13) and cap-
screw (11) and washer (12) from other side.
NOTE
Keep steering clutch assembly level
13
while lifting. Clutch is free to slide out
of outer drum.
15
It may be necessary to pry inner
drum away from shoulder of the hub.
12.
Lift steering clutch (13) from clutch case.
10
387-248
0152 00-3
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |