 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
STEERING CLUTCH MAINTENANCE - CONTINUED
0152 00
REMOVAL - CONTINUED
2.
Remove plug (3) at side of steering clutch case to gain access to capscrews (4).
3.
Position jack under tooth of track shoe (5).
4.
Align capscrews (4) with hole at plug (3).
4 (HIDDEN)
3
5
387-246
5.
Remove hose assembly (6) from oil line (7) in clutch case.
6.
Remove two nuts (8), washers (9) and hose assembly (6) from brake band (10).
WARNING
Do not remove all capscrews. Leave one capscrew on each side of clutch. If clutch drops before sling is
attached, personal injury and equipment damage will result.
NOTE
4,14
10
6
Steering clutch must be turned to line up
capscrews (4) with plug (3) hole by using a
jack to push on grouser of track shoe (5).
16
7.
Remove eleven capscrews (11) and washers (12) from
hub on one side of steering clutch (13).
8.
Remove eight capscrews (4) and washers (14) on
15
flange side of steering clutch (13) through plug (3)
hole in side of gear case.
9.
Install two 3/8 in. -16NC x 4 in. long capscrews (15)
through brake band (10) clamp and secure capscrews
with two 3/8 in. hex nuts (16).
13
387-247
7
8,9
11,12
0152 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals