|
|
TM 5-2410-237-23
TRACK ROLLER FRAME ASSEMBLY REPLACEMENT - CONTINUED
0135 00
REMOVAL
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
NOTE
1
2,3
5
Weight of an assembled track roller frame
4
is 3,900 lb (1,769 kg).
6,7
1.
Attach ratchet puller to front of track roller frame (1).
2.
Install two lifting links (2) with 3/4 -10 x 1 1-1/2 in.
bolts and attach a suitable lifting device to front sup-
port assembly (3) and point (4) on front of track roller
frame (1).
3.
Insert a block of wood between equalizer bar and
frame.
387-684
4.
Attach ratchet puller to lifting device at point (4).
5.
Lift track roller frame (1) and use ratchet puller to
raise evenly to remove tension on equalizer bar (5).
6.
Remove four capscrews (6) and lockwashers (7) that
secure front support assembly (3) to track roller frame
(1). Discard lockwashers.
0135 00-2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |