|
|
TM 5-2410-237-23
TRACK ROLLERS REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Personnel Required
Tools and Special Tools
Tool kit, general mechanic's (Item 122, WP 0250
Two
Shop equipment, machine shop (Item 107, WP
Equipment Condition
Track roller guards removed (WP 0162 00)
Lifting equipment, 200 lb capacity
Track loosened (WP 0132 00)
References
Machine raised off ground (WP 0243 00)
REMOVAL
NOTE
If tractor has less than 1000 hours on it, you may have to separate track to remove track rollers.
1.
Place a suitable jack under track and raise track off track roller (1).
1
WARNING
Use extreme caution when handling
heavy parts. Provide adequate sup-
port and use assistance during proce-
dure. Ensure that any lifting device
used is in good condition and of suit-
able load capacity. Keep clear of
heavy parts supported only by lifting
device. Failure to follow this warning
may result in death or injury to per-
387-592
sonnel.
Use assistance and extreme caution when using a chain and tanker bar to stabilize track roller. Ensure
track roller is securely supported prior to loosening mounting hardware.
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |