 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
TRACK ASSEMBLY INSPECTION AND ADJUSTMENT - CONTINUED
0132 00
ADJUSTMENT - CONTINUED
WARNING
Wear eye protection and keep face clear when venting grease from relief valve during track adjustment.
NEVER visually inspect relief valve to see if grease is escaping. Always observe track to verify it has loos-
ened. Failure to follow this warning could cause eye injury or blindness.
8.
Open relief valve (2) no more than one turn and allow grease to escape and idler to move back.
4
6
1/2 IN. (13 MM)
5
386-716
9.
Put a drawbar pin (7), or a length of steel pipe, between teeth at top of track drive sprocket (8) near track link.
7
8
386-251
0132 00-7
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals