 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
BEVEL GEAR AND SHAFT REPLACEMENT - CONTINUED
0127 00
INSTALLATION - CONTINUED
f.
Reinstall bearing cage (14) and shims (22) on bevel gear shaft (19) with eight capscrews (20) and washers (21).
Tighten capscrews evenly to 100 lb-ft (136 Nm).
g.
Remove eight capscrews (20) from bearing cage (15) at steering clutch end of bevel gear shaft (19). Reinstall cap-
screws with eight washers (21) and tighten capscrews to 100 lb-ft (136 Nm).
h.
Check torque on steering clutch end of bevel gear shaft (19). Torque must be 70-85 lb-in. (7.9-9.6 Nm). If neces-
sary, remove or add shims (22) under bearing cage (14) until torque is correct.
15
14
19
20
20
21
21
22
22
387-452
0127 00-7
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals