FINAL DRIVE CASE, GEARS, IDLER PINION, AND BEARINGS REPLACEMENT

TM 5-2410-237-23

FINAL DRIVE CASE, GEARS, IDLER PINION, AND BEARINGS REPLACEMENT

THIS WORK PACKAGE COVERS

Removal, Cleaning, Inspection, Installation

INITIAL SETUP

Materials/Parts - Continued

Tools and Special Tools

Tool kit, general mechanic's (Item 122,

Lock (18 and 25)

Pin, guide, 5/8 in. -11NC

Shop equipment, general purpose repair (Item 106,

Plug (9)

Link, lifting (Item 51, WP 0250 00)

Retainer (23)

Link, lifting (Item 134, WP 0250 00)

Pin, shoulder (Item 63, WP 0250 00)

Screw, #10-32

Press, arbor (Item 74, WP 0250 00)

Wood blocks, 4 in. x 4 in. x 3 ft long

Sling, nylon (Item 109, WP 0250 00)

Lifting equipment, 400 lb capacity

References

Bolt, 5/8-11 x 2 in.

TM 5-2410-237-10

Bolt, 3/8-16 x 1-1/2 in.

Materials/Parts

Compound, gasket, shellac (Item 8, WP 0249 00)

Grease, GAA (Item 22, WP 0249 00)

Personnel Required

Oil, lubricating (Item 23, 24, 25 or 26, WP 0249 00)

Rag, wiping (Item 29, WP 0249 00)

Two

Wire, nonelectrical (Item 40, WP 0249 00)

Equipment Condition

Capscrew, forcing, 1/2 in.-13NC (5)

Track drive sprocket removed (WP 0141 00)

Capscrew, 1/4 in.-20NC

WARNING

Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-

cedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of

heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to

personnel.

0125 00-1