 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
TRANSMISSION CONTROL VALVES REPLACEMENT - CONTINUED
0117 00
INSTALLATION - CONTINUED
7.
Position pressure control valve (24) on top of selector valve (27). Secure to transmission with three washers (23) and
capscrews (22). Tighten capscrews to 35 lb-ft (47 Nm).
8.
Install new gasket (21) and cover (20) to transmission with 14 new lockwashers (19) and capscrews (18).
20,21
24
22,23
387-624
387-623
18,19
9.
Install nut (17) and rod (16). Install capscrew (15),
13,14,15,17
16 12
9,10,11
new lockwasher (14) and nut (13).
10.
Install rod (12) onto transmission with capscrew (11),
new lockwasher (10) and nut (9).
11.
Adjust rods (12 and 16) as required.
12.
Install new gasket (8) and spout (5) with four new
3
lockwashers (7) and nuts (6).
13.
Remove plug from end of hose assembly (4). Connect
hose assembly to spout (5).
4
14.
Secure hose assembly (4) to transmission with two
clips (3), new lockwashers (2) and capscrews (1).
387-622
5
1,2
6,7
8
0117 00-5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals