|
|
TM 5-2410-237-23
TRANSMISSION CONTROL VALVES REPLACEMENT - CONTINUED
0117 00
INSTALLATION
CAUTION
Ensure all components are clean before installation. Perform installation in a clean work environment.
Contamination of transmission system could result in premature failure.
NOTE
Lightly coat all components with clean oil before installation.
1.
Install two new O-rings (34) onto each sleeve (33). Install three sleeves into transmission.
2.
Install two new O-rings (32).
3.
Install two new O-rings (31) onto sleeve (30). Install sleeve in transmission.
4.
Position selector valve (27) in transmission. Ensure that sleeves (30 and 33) align with holes in selector valve and that
links on ends of valve spools are in position on control levers.
5.
Secure selector valve (27) with three washers (29) and capscrews (28). Tighten capscrews to 35 lb-ft (47 Nm).
6.
Install four new O-rings (25 and 26) into top of selector valve (27).
33
30
34
26
25
31
387-626
32
28,29
387-625
26
27
0117 00-4
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |