 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
TRANSMISSION ASSEMBLY REPLACEMENT - CONTINUED
0116 00
INSTALLATION - CONTINUED
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
CAUTION
Transmission assembly must be lifted so that locator studs are level. This prevents binding and damage to
bottom locator studs.
NOTE
Transmission and transfer gears assembly weighs 1,150 lb (522 kg).
4.
Attach a suitable lifting device to lifting links (2) on transmission assembly (3).
5.
Install six new lockwashers (5) and nuts (4) to secure transmission assembly (3) to bevel gear case.
6.
Connect hose to steering clutch relief valve (WP 0154 00).
7.
Remove lifting device, four bolts and lifting links (2).
8.
For tractors equipped with a winch, connect hose to gear pump. (WP 0189 00).
9.
Connect oil lines to transmission and manifold (WP 0110 00).
3
1
387-957
4
5
2
0116 00-4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals