 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
TRANSMISSION OIL MAGNETIC SCREEN ASSEMBLY MAINTENANCE - CONTINUED
0112 00
CLEANING MAGNETIC SCREEN - CONTINUED
NOTE
Dropping a magnet may result in demagnetization. Do not drop magnets.
6.
Disassemble magnetic screen assembly (5) by remov-
ing tube (7) and four magnets (8) from screen (9).
7.
Inspect magnetic screen assembly (5) for damage.
8.
Inspect tube (7) and magnets (8) for metal shavings,
9
particles and damage. If metal shavings are found,
contact Direct Support Maintenance.
8
5
7
387-275
WARNING
Solvent cleaning compound MIL-PRF-680 Type III is an environmentally compliant and low toxic
material. However, it may be irritating to the eyes and skin. Use protective gloves and goggles. Use in
well-ventilated areas. Keep away from open flames and other sources of ignition.
Particles blown by compressed air are hazardous. DO NOT exceed 15 psi (103 kPa) nozzle pressure
when drying parts with compressed air. Use a maximum of 30 psi (207 kPa) when cleaning compo-
nents. DO NOT direct compressed air against human skin. Failure to follow this warning may result in
serious injury or death. Make sure air stream is directed away from user and other personnel in the
area. To prevent injury, user must wear protective goggles or face shield.
9.
Clean components with solvent cleaning compound and dry using pressurized air.
0112 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals