|
|
TM 5-2410-237-23
TRANSMISSION AND STEERING CLUTCH OIL FILTER ASSEMBLY MAINTENANCE- CONTINUED
0111 00
INSTALLATION
1.
Place filter housing (3) into position on machine and
10
install four washers (17) and nuts (16).
NOTE
6,7
16,17
Ensure O-ring grooves are clean
3
before installation.
Lightly coat new O-rings with clean
8
oil before installation.
9
2.
Install new O-ring (15) in tube assembly (14).
13
14
3.
Install four capscrews (11), washers (12) split flanges
(13) and tube assembly (14) to base of filter housing
15
(3).
11,12
387-272
4.
Install new O-ring (10) in hose assembly (9).
5.
Install eight capscrews (6), washers (7) two split
flanges (8) and hose assembly (9) to filter housing (3).
6.
Perform Service, steps 5 through 7.
7.
Operate machine and check for leaks (TM 5-2410-
237-10).
END OF WORK PACKAGE
0111 00-4
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |