 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
BACKUP ALARM REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Equipment Condition
Tools/Special Tools
Battery disconnect switch in OFF position (TM 5-
Tool kit, general mechanic's (Item 122, WP 0250
2410-237-10)
Materials/Parts
Tag, marker (Item 37, WP 0249 00)
WARNING
Turn battery disconnect switch to OFF position before replacing backup alarm. Failure to follow this warn-
ing could result in personal injury or damage to equipment.
REMOVAL
1.
Remove two capscrews (1), washers (2) and nuts (3) that hold alarm (4) to bracket (5).
NOTE
Tag wires to ensure correct installation.
2.
Remove alarm (4) from bracket (5).
3.
Disconnect wires (6) from alarm (4).
4.
To remove bracket (5) from ROPS rear panel, remove two capscrews (7), washers (8) and nuts (9).
INSTALLATION
4
1
7
6
1.
Position bracket (5) on ROPS rear panel and install
two capscrews (7), washers (8) and nuts (9).
2.
Connect wires (6) to alarm (4).
3.
Place alarm (4) in position on bracket (5) and install
two capscrews (1), washers (2) and nuts (3).
8,9
4.
Turn battery disconnect switch to ON position (TM 5-
5
2410-237-10).
2,3
5.
Check backup alarm for proper operation.
387-201
END OF WORK PACKAGE
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals