 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
ALTERNATOR REPLACEMENT - CONTINUED
0076 00
REMOVAL - CONTINUED
NOTE
If alternator requires replacement, continue to step 5.
5.
Remove nut (11) and pulley (12) from alternator shaft
13
12
(13).
INSTALLATION
1.
Install pulley (12) onto alternator shaft (13) and secure
11
with nut (11). Tighten nut to 76 lb-ft (103 Nm).
(HIDDEN)
NOTE
Do NOT tighten alternator mounting cap-
screws until V-belt adjustment is com-
plete.
2.
Position alternator (4) on bracket (10) and install cap-
387-564
screw (9) and nut (8).
3.
Install washer (6) and capscrew (5) to alternator (4) and alternator block (7).
4.
Connect wires (3) and install two nuts (1 and 2).
5.
Connect battery cables (WP 0101 00).
6.
Install and adjust V-belts (WP 0074 00).
7.
Run engine and check for proper operation of charging system (TM 5-2410-237-10).
4 5,6
3
7
8
3
9
2
10
1
387-560
END OF WORK PACKAGE
0076 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals