 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
FUEL INJECTION NOZZLE REPLACEMENT - CONTINUED
0040 00
REMOVAL
1.
Remove capscrew (1) and clamp (2) from fuel injection nozzle (3).
CAUTION
Ensure slide hammer puller tool is in alignment with fuel injection nozzle. This will prevent distortion
of nozzle which can cause it to bend or break off during removal.
Do not exceed 150 lb-ft (203 Nm) force on puller tool.
2.
Position puller tool on fuel injection nozzle (3) and remove nozzle from cylinder head.
3.
Remove carbon seal (4) from fuel injection nozzle (3). Discard carbon seal.
4.
Remove washer (5) from fuel injector nozzle (3). Discard washer.
5
3
4
387-733
3
387-734
1
2
INSTALLATION
1.
Install new washer (5) on fuel injection nozzle (3).
2.
Install new carbon seal (4) in groove A on fuel injection nozzle (3).
3.
Insert fuel injection nozzle (3) in cylinder head.
4
5
4.
Install clamp (2) and capscrew (1) to secure fuel injec-
tion nozzle (3).
5.
Connect fuel injection lines (WP 0044 00).
A
6.
Bleed air from fuel system (WP 0041 00).
7.
Run engine and check for leaks (TM 5-2410-237-10).
387-737
END OF WORK PACKAGE
0040 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals