REAR ACCESSORY DRIVE COVER ASSEMBLY REPLACEMENT

TM 5-2410-237-23

REAR ACCESSORY DRIVE COVER ASSEMBLY REPLACEMENT

THIS WORK PACKAGE COVERS

Removal, Installation

INITIAL SETUP

Materials/Parts - Continued

Tools and Special Tools

Seal (9)

Tool kit, general mechanic's (Item 122, WP 0250

References

TM 5-2410-237-10

Shop equipment, general purpose repair (Item 106,

Equipment Condition

Dash assembly removed (WP 0160 00)

Materials/Parts

Hydraulic pump removed (WP 0199 00)

Winch pump removed (if equipped) (WP 0189 00)

Gasket (3 and 8)

REMOVAL

Remove six capscrews (1) from cover (2). Remove cover and gasket (3). Discard gasket.

Remove 13 capscrews (4), three nuts (5) and washers (6). Remove cover (7).

Remove gasket (8) and seal (9). Discard gasket and seal.

If necessary, remove three studs (10) from flywheel housing.

If necessary, remove two washers (11), pins (12) and plug (13). Use a bearing puller to remove two bearings (14) from

cover (7).

387-267