CRANKSHAFT FRONT SEAL AND WEAR SLEEVE REPLACEMENT

TM 5-2410-237-23

CRANKSHAFT FRONT SEAL AND WEAR SLEEVE REPLACEMENT

THIS WORK PACKAGE COVERS

Removal, Installation

INITIAL SETUP

Materials/Parts - Continued

Tools and Special Tools

Tool kit, general mechanic's (Item 122, WP 0250

Rag, wiping (Item 29, WP 0249 00)

Sealing compound (Item 32, WP 0249 00)

Shop equipment, general purpose repair (Item 106,

Seal (1)

Distorter sleeve (Item 28, WP 0250 00)

Sleeve, wear (4)

Installer (Item 45, WP 0250 00)

Puller kit, universal (Item 87, WP 0250 00)

References

Tool, distorter (Item 121, WP 0250 00)

TM 5-2410-237-10

Materials/Parts

Equipment Condition

Oil, lubricating (Item 26, WP 0249 00)

Crankshaft pulley removed (WP 0028 00)

Primer, coating (Item 28, WP 0249 00)

REMOVAL

CAUTION

Use care not to damage crankshaft flange when removing seal.

NOTE

When replacing front crankshaft seal, front wear sleeve must also be replaced.

Drill three evenly spaced pilot holes in crankshaft front seal (1).

Using slide hammer puller, alternate between drilled holes to remove crankshaft front seal (1). Discard seal.

387-221