|
|
TM 5-2410-237-23
TROUBLESHOOTING PROCEDURES - CONTINUED
0006 00
Table 6. Electrical System Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
6.
Solenoid and Starting Motor Operate;
b. Connect
meter
lead
Engine Cranks Slowly - Continued.
directly across battery
terminals as shown below.
1. If voltage is not 20 volts or
c. Push governor control
more, go to Table 6,
lever forward past detent
Malfunction 2.
and crank engine for
approximately
30
seconds. Observe meter
reading after cranking has
stopped.
2. If voltage is satisfactory,
replace starting motor (WP
387-887
0006 00-49
Change 1
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |