|
|
TM 5-2410-237-23
TROUBLESHOOTING PROCEDURES - CONTINUED
0006 00
Table 6. Electrical System Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
5.
Starting Motor Inoperative - Continued.
b. Place battery disconnect
switch to ON position.
1. If battery voltage is indicated,
c. Momentarily turn start
replace starting motor (WP
switch fully clockwise
and
observe
meter
reading.
2. If voltage is not indicated,
replace starter solenoid (WP
G
S
MTR
(+)
(-)
BAT
387-873
5.
Check starter relay and
a. Place battery disconnect
switch in OFF position.
b. Set
to
appropriate voltage range.
c. Connect meter positive
lead to terminal S on
d. Connect meter negative
lead to chassis ground.
0006 00-35
Change 1
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |