|
|
TM 5-2410-237-23
TROUBLESHOOTING PROCEDURES - CONTINUED
0006 00
Table 2. Transmission Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
9.
Transmission Oil Dirty, Foamy and/or
3.
Locate
defective
1. If oil contains bronze-colored
component.
Milky - Continued.
particles, replace trans-
mission (WP 0116 00).
2. If oil contains shiny steel
particles, replace trans-
mission oil pump (WP 0118
3. If oil contains rubber
particles, check for hose(s)
failure and replace defective
hose(s).
4. If oil contains aluminum
particles, replace torque
divider (WP 0115 00).
10. Torque Divider Overheats (According to
1.
Check
transmission
oil
Add oil as necessary (WP 0107
Converter Oil Temperature Gage).
level.
2.
Check V-belts.
Adjust V-belt tension or replace
V-belts (WP 0074 00).
Replace oil temperature gage if
3.
Check
converter
oil
temperature gage for proper
test gage does not indicate
operation using a gage
overheating (WP 0083 00).
known to be good.
4.
Check line connections for
Tighten connections or replace
leaks or damaged oil lines.
damaged oil line(s) (WP 0110
5.
Check for obstruction at
Clean or replace breathers (WP
system vents.
1. Clean torque divider screen
6.
Check for excessive in oil in
the engine flywheel housing
assembly (WP 0106 00).
and torque divider cover.
2. Replace
torque
divider
scavenge pump (WP 0121
3. Replace torque divider (WP
7.
Check for loose oil filter
Tighten cover capscrews and/or
housing cover.
replace O-ring (WP 0111 00).
8.
Check transmission
oil
Clean or replace transmission oil
cooler.
cooler (WP 0109 00).
Change 1
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |