 |
|||
|
|
|||
|
Page Title:
Table 1. Engine Troubleshooting Procedures - Continued. |
|
||
| ||||||||||
|
|
 TM 5-2410-237-23
TROUBLESHOOTING PROCEDURES - CONTINUED
0006 00
Table 1. Engine Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
ETHER START SYSTEM
Replace canister if empty (WP
20. Engine Cranks But Will Not Start in Cold
1.
Check ether canister by
Weather (Fuel System Operating Properly).
removing from valve.
Shake canister and listen for
liquid splashing inside.
2.
Check starting aid valve for
Refer to Electrical Trouble-
proper operation.
shooting.
3.
Check starting aid valve
tube assembly for damage.
a. Disconnect both ends of
tube assembly.
1. If tube assembly is not
b. Inspect tube assembly for
kinks, holes and damaged
damaged, replace starting aid
fittings.
valve (WP 0061 00).
2. Replace
damaged
tube
assembly (WP 0061 00).
EXHAUST SYSTEM
21. Excessive Exhaust Fumes and/or Fumes in
1.
Inspect muffler for wear and
Replace muffler (WP 0062 00).
Cab.
damage.
Replace seal, coupling or
2.
Inspect
muffler-to-
turbocharger coupling for
preformed packing (WP 0062
wear and damage.
COOLING SYSTEM
22. Engine Overheats (According to Engine
1.
Check radiator for airflow
Remove
obstructions
from
Water Temperature Gage).
obstructions.
radiator.
2.
Check coolant level.
If coolant is low, fill to proper
level (WP 0065 00).
3.
Inspect for looseness,
1. Check V-belt tension and
missing and worn V-belts.
adjust as required (WP 0074
2. Replace missing or worn V-
belt (WP 0074 00).
Change 1
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals