|
| |
TM5-2410-237-10
NOTE
To reel in or out slowly, decelerate and accelerate as necessary.
e. To unspool cable under power, move the
winch control lever to the REEL OUT
position. When released, the lever will
return to the BRAKE ON (Neutral)
position.
2-17. OPERATING TECHNIQUES FOR WINCHING.
Exercise care with suspended loads. If engine speed is too low the
weight of the load may cause it to drop, even when the winch is in REEL
IN position.
Make certain personnel are clear of cable when there is a load on the
cable. Cable can break and cause personal injury.
a. General Use.
(1) For towing, holding a load, or when
winch is not in use, put winch control
lever in the BRAKE ON (Neutral)
position. The cable will not move.
2-42
|
