|
| |
TM5-2410-237-10
b. To allow a load to move out cable, move
winch control lever to the BRAKE OFF
(Release) position. When released, the
lever will return to the BRAKE ON
(Neutral) position.
c. There is a BREAK OFF position with a
detent which also allows a load to move
out the cable load. The lever will not
automatically return to the BRAKE ON
(Neutral) position from the detent; it must
be moved.
NOTE
For maximum service life of winch, engage winch at lowest practical
engine speed. Heavy line loads will require winch engagements at higher
engine speeds than with lighter loads.
Always winch with cable in as straight a line as possible behind tractor.
d. To reel the cable in under power, move
winch control lever to the REEL IN
position. When released, the lever will
return to the BRAKE ON (Neutral)
position.
2-41
|
