Figure 6-11. Removing stator.

(7) Remove the 8 torque converter carrier to

cover mounting bolts (7, fig. 6-8).

in. - 16 NC forcing screws

( 8 ) Install two

and separate the housing (9) from carrier assembly

(8).

( 9 ) Remove the forcing screws and install two

in. - 16 NC forged eyebolts. Attach a hoist and

remove

divider

housing

(9)

from

carrier

assembly

(8).

(10) Remove the impeller assembly retaining

bolts (18, fig. 6-1).

(11) Remove the impeller assembly (5).

(12) Remove the eight stator assembly-to-

carrier assembly retaining bolts (19).

( 1 3 ) Remove the stator as shown in figure 6-

11 by placing two wood blocks on the impeller and

prying

upward.

Figure 6-12. Impeller disassembly.

(b) R e m o v e t h e d r i v e g e a r ( 2 ) .

Figure 6-11. Removing stator.

(14) Disassemble the impeller assembly as

bearing (4) from impeller (3).

follows:

(d) R e m o v e t h e b e a r i n g f r o m r e t a i n e r .

(a) R e m o v e t h e s c a v e n g e p u m p d r i v e g e a r

(e) Remove the retaining ring (6) from

retaining bolts (1, fig. 6-12).

bearing.