 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
RIPPER TOOTH REPLACEMENT - CONTINUED
0174 00
REMOVAL
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Failure to follow this warning may result in death or injury to personnel.
1.
Raise ripper assembly (1) until teeth (2) are approximately 6 in. (15.2 cm) off ground.
2.
Place blocks under ripper beam (3). Shut down engine.
NOTE
Ripper tooth weighs 24 lb (11 kg).
3.
While facing rear of tractor, drive pin (4) from side of tooth (2).
4.
Remove tooth (2) from end of shank (5).
5.
Repeat steps 3 and 4 for other teeth.
6.
If guard (6) or guard (7) is damaged, drive out pin (8) and remove guard.
1
3
7
8
2
2
5
4
8
6
386-585
386-586
0174 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals